1. High Pressure Solenoid Valve Product Leakage Causes
1) The actual working environment and medium properties of high-pressure solenoid valve, beyond the scope of product adaptation. 2) The installation of high-voltage solenoid valve error, or fill the wrong way resulting in high-voltage solenoid valve product leakage. 3) After a long period of use, high-pressure solenoid valve mechanical parts wear, such as seals and packing wear caused by leakage.
2. High Pressure Solenoid Valve Product Leakage Inspection Points
1) High-voltage solenoid valve product disassembly and repair, requires the working environment must be clean2) In cleaning the external high-pressure solenoid valve, to remember to clear the nameplate and various signs3) To pay attention to check the base and valve plate contact surface4) Check the high-pressure solenoid valve mechanical seal parts of the wear degree.
High voltage solenoid valve failure after the relevant operation: In the high-voltage solenoid valve failure repair process, if there is found that the high-voltage solenoid valve damaged parts, should be replaced or repaired. Several important packing and seal elements require special attention. After installation can not immediately put into use, need to carry out the work test first, test the work strength and tightness of high-voltage solenoid valve.
High-pressure solenoid valve is a kind of product widely used in fluid transportation equipment. It is usually used with pipeline, water pump and other fluid transportation equipment. The correct operation and use of solenoid valve life extension and reduce the failure rate has a great role, solenoid valve product maintenance and maintenance, as well as the work of the specific operation as follows:
1. After the installation of high-voltage solenoid valve products, users need to pass through the media for testing, solenoid valve products can work properly before the formal work.
2. High-pressure solenoid valve products in the use of the process, the product should pay attention to the pressure of the scope of work, beyond the scope of work pressure of the product will damage solenoid valve products, resulting in leakage and loss to the user. If there is abnormal pressure or more than the actual range of work solenoid valve, please immediately close the solenoid valve before and after the manual valve, stop the solenoid valve work.
3. Mechanical equipment in the working state, should avoid the loose situation, in order to reduce mechanical vibration, reduce mechanical damage, extend the life of solenoid valve.
4. High-voltage solenoid valve in the working state, should avoid collision and contact with other heavy objects. So as not to affect the solenoid valve work.
5. The sealing of the high-pressure solenoid valve is one of the important parts of the whole solenoid valve, so the sealing performance of the solenoid valve should be ensured. And keep the solenoid valve sealed inside the clean.
6. For the work in special environment of solenoid valve products, such as close to water, working environment too much debris, etc. , should be equipped with appropriate protective equipment for solenoid valve.
7. If you do not use high pressure solenoid valve products in a certain period of time, users need to close the valve before the manual valve, and the solenoid valve internal cleaning, to ensure that the solenoid valve dry before preservation.
Post time: Nov-25-2021